Thermal Grizzly - side 7

Water cooling fitting Thermal Grizzly DeltaMate ST16 is a brass connector for soft tubes in custom water cooling loops, with EPDM sealing rings, a tapered barb and a knurled compression ring for secure tube installation.

Precisely machined from brass, the fitting is designed to connect individual loop components, while the EPDM O-rings resist ozone and UV radiation.

• For flexible soft tubes in custom water cooling systems
• Single tapered barb for straightforward installation
• Knurled compression ring grips tubing with high retention force
• Robust design supports installation with a hex key

DeltaMate ST16 helps create a clean, secure and reliable custom water cooling loop.

Quick disconnect fitting for custom water cooling loops with a drip-free coupling, integrated shutoff function, vacuum-assisted anti-leak design and precision-machined brass construction.

Thermal Grizzly DeltaMate Quick Disconnect Female - M uses a female quick-disconnect connector with a male thread and highly elastic EPDM O-rings that resist ozone and UV radiation.

• True zero-spill quick disconnect design
• Push-to-connect and slide-to-release locking mechanism
• High-flow internal geometry to minimize restriction
• Robust brass body supports installation with a hex key

Designed for serviceable custom water cooling setups where components need to be swapped efficiently and coolant loss must be reduced.

Quick disconnect fitting for custom water cooling loops, with a female QDC connector, male thread, integrated shutoff, vacuum-assisted anti-leak design and high-flow internal geometry.

Thermal Grizzly DeltaMate Quick Disconnect Female - M is precision-machined from brass and uses highly elastic EPDM O-rings that resist ozone and UV radiation.

• Drip-free quick-release coupling
• Push-to-connect and slide-to-release locking mechanism
• Designed to minimize flow resistance
• Robust construction for seamless loop integration

Ideal for flexible custom water cooling setups where components need to be disconnected without draining the entire loop.

Flydende metal kølepasta, sølvpasta, densitet: 6,29 g/cm³, driftstemperatur: -50 - 200° C, 5 gram

GPU-vandblok til Asus ROG Astral GeForce RTX 5090 har en ultra højtydende coldplate, målrettet VRAM- og VRM-køling samt et sort anodiseret aluminiumshus med RGB-belysning.

DeltaMate GPU Block bruger et dobbelt coldplate-design med nikkelbelagte kobberkontaktflader, der er CNC-bearbejdet for effektiv varmeoverførsel.

• Ultra højtydende microfin-coldplate
• Fuldt metalkonstruktion med oplyst vindue
• Direkte messingterminal med én indgang og én udgang
• Inkluderer Thermal Grizzly termisk pasta og termiske pads

Det medfølgende “The Oracle” spacer PCB hjælper med at kontrollere pasform og planlægge et tilpasset væskekølingsloop før installation.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Computerkølesystemdel/-tilbehør Thermal Grizzly TG-GG-01 TG GPU Guard er en meget komprimerbar skumpakning designet til GPU-dies, som hjælper med at beskytte nærliggende komponenter ved brug af flydende metal eller andre elektrisk ledende termiske interface-materialer.

TG GPU Guard dækker de overflademonterede enheder (SMD'er) ved siden af GPU'en og er en smule højere end GPU-dien, så monteringspresset komprimerer skummet for at udligne højdeforskelle mellem PCB'et og køleren og hjælpe med at forhindre, at termisk pasta spreder sig til andre komponenter. Den begrænser også ilteksponering for det flydende metal for at øge dets levetid og er gallium-resistent.

• Meget komprimerbar skumpakning til GPU-dies
• Beskytter elektroniske komponenter ved brug af ledende termiske interface-materialer
• Dækker SMD'er ved siden af GPU'en og sidder en smule højere end GPU-dien
• Grundmaterialehøjde 0.8 mm, kan komprimeres ned til 0.15 mm
• Hjælper med at forhindre, at flydende metal spreder sig til PCB-komponenter
• Gallium-resistent

Ideel til renere og mere sikker påføring af flydende metal samt mere holdbar termisk interface-ydeevne på grafikkort.

Termisk ledende gapfylder til at erstatte GPU-termiske pads, med et driftstemperaturområde fra -40°C til +120°C.

TG Putty er en termisk ledende sammensætning beregnet til GPU-anvendelser, tilbudt i flere størrelser og ydeevnevarianter.

• Erstatter standard GPU-termiske pads for at bygge bro over ujævne overflader
• Driftstemperatur: -40°C til +120°C
• Tilgængeligt indhold: 30 g og 100 g
• Tilgængelige varianter: Basic, Advance, Pro
• Datablad og teknisk information tilgængelig til download

Sikrer pålidelig termisk kontakt over mellemrum for at støtte varmeoverførsel mellem GPU-komponenter.

Thermal Grizzly præsenterer WireView GPU, en enhed til måling af strømforbruget af PCI-udvidelses- og plug-in-kort, som er udviklet i samarbejde med Jon „elmor“ Sandström. Samtidig muliggør det U-formede design af adapteren optimeret kabelføring til ren kabelstyring.

Hvad gør WireView GPU'en?
WireView GPU'en muliggør måling af strømforbruget for PCI-udvidelses- og plug-in-kort og logger disse data for at bestemme strømforbruget. Disse data kan blandt andet bruges til at bestemme strømomkostningerne på et grafikkort eller til at sammenligne strømforbruget med andre grafikkort - alt imens den ser cool ud!

- 1 x 8-Pins PCI-E - omvendt retning

Carbonaut pad er en termisk pude af kulfiber, der anvendes i stedet for termisk pasta, termisk ledningsevne: 62,5 W / (mK), størrelse: 51x68 og kompatibel med AMD TR4 socket

Carbonaut pad er en termisk pude af kulfiber, der anvendes i stedet for termisk pasta, termisk ledningsevne: 62,5 W / (mK), størrelse: 38x38 og kompatibel med Intel LGA20xx socket & AMD AM4 socket

Water cooling extender fitting DeltaMate Extender - MF7 connects individual components in a custom water cooling loop with precisely machined brass construction and EPDM sealing rings.

Designed as an extension fitting, it is installed between a water-cooling component port and a fitting to create additional spacing in the loop.

• Made from brass for durable water cooling use
• EPDM O-rings resistant to ozone and UV radiation
• Male and female threading for loop integration
• Robust design for reliable installation

A practical connector for building a clean, reliable custom water cooling setup.

Ryzen 7000-processorernes varmespreder er meget tyk, hvilket blandt andet skyldes kompatibiliteten med ældre CPU-kølere til AM4-sokkelen. Den unødvendige tykkelse af varmesprederen reducerer varmeledningsevnen, så CPU'erne drives ved meget høje temperaturer, som ligger omkring 95 grader Celsius. Ved at fjerne varmesprederen ("halshugge", "delidding"), kan CPU-køleren monteres direkte på chiplets af Ryzen 7000 CPU'en, hvilket drastisk reducerer temperaturerne. For at undgå beskadigelse af de følsomme chips og for at forhindre problemer under drift (f.eks. RAM), erstatter Ryzen 7000 Direct Die Frame bundkortets Socket Actuation Mechanism (SAM).

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity. This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Termisk pad Thermal Grizzly Minus Pad extreme 2 leverer enestående varmeledningsevne og lav termisk grænseflademodstand til højtydende varmeoverførsel.

Denne termiske pad er designet til ekstreme anvendelser og bruger en partikelblanding af aluminiumoxid, aluminiumhydroxid og aluminiumpulver til at udfylde selv de mindste mellemrum i matrixen, hvilket hjælper med at optimere kontakten mellem varmekilde og køler. Dens bløde konsistens tilpasser sig godt til overflader, den er elektrisk ikke-ledende, og den hærder eller stivner ikke over tid.

• Enestående varmeledningsevne med lav termisk grænseflademodstand
• Optimeret materialesammensætning for optimal varmeoverførsel
• Blød konsistens for god tilpasning til overflader
• Elektrisk ikke-ledende
• Hærder eller stivner ikke selv ved længere tids brug

Pålidelig termisk grænsefladeydelse til krævende køleopsætninger.

Værktøj til udsmørring af Thermal Grizzly flydende metal kølepasta, pakke med 3 stk

GPU-vandblok til ROG Astral RTX 5090 grafikkort kombinerer understøttelse af brugerdefineret væskekøling, digital aRGB LED-belysning og materialer inklusive aluminium, EPDM-gummi, PMMA, akryl, nikkelbelagt messing og nikkelbelagt kobber.

Thermal Grizzly DeltaMate GPU Block er designet til kompatible ROG Astral GeForce RTX 5090-modeller, inklusive OC- og LC-udgaver, og leveres med monteringshardware, værktøj, termisk putty, termisk compound og termiske pads.

• Digital aRGB LED-belysning
• 3-pin-stik
• Inkluderer skruer, møtrikker, skiver, handsker, unbrakonøgler og TG spatler
• Inkluderer TG Putty Advance, TG Duronaut og TG Minus Pad materialer
• Understøtter DeltaMate fittings og den valgfrie Through Terminal til brugerdefinerede vandkølingsloops

En målrettet GPU-køleløsning til at bygge en DeltaMate-baseret brugerdefineret væskekølingsopsætning.

Quick disconnect fitting for custom water cooling loops with a female QDC connector, male thread, drip-free shutoff function and vacuum-assisted anti-leak design.

DeltaMate Quick Disconnect Female - M is precisely machined from brass and uses highly elastic EPDM O-rings resistant to ozone and UV radiation.

• Push-to-connect and slide-to-release locking mechanism
• Integrated shutoff for controlled disconnection
• High-flow internal geometry to minimize restriction
• Designed for use with a matching male QDC connector

Ideal for making water-cooling components easier to replace while helping retain coolant when disconnected.

Quick disconnect fitting DeltaMate Quick Disconnect Female - M is a drip-free water cooling connector with a female QDC coupling, male thread, integrated shutoff and vacuum-assisted anti-leak design.

Designed for custom water cooling loops, it helps individual components be replaced without draining the entire loop and uses a push-to-connect, slide-to-release locking mechanism for practical handling.

• Precision-machined brass construction
• EPDM O-rings resistant to ozone and UV radiation
• Internal geometry optimized for high flow and minimized flow resistance
• Requires a matching male QDC connector fitting for a complete coupling

It provides a robust, reliable connection for building and maintaining flexible custom water cooling setups.

Rotary fitting for custom water cooling loops, designed with male and female threads, brass construction and EPDM sealing rings.

Thermal Grizzly DeltaMate Rotary is precisely machined for individual loop components, with brass offering anodic compatibility with other metals as well as higher hardness and corrosion resistance than copper.

• Highly elastic EPDM O-rings resist ozone and UV radiation.
• Can be combined modularly with other DeltaMate Rotary and Extender Fittings.
• Additional fittings mechanically lock the rotary joint for secure assembly.
• Optional aesthetic cover with DeltaMate logo is included.

A precise connector for building a clean, secure and modular custom water cooling loop.

Water cooling fitting for soft tubes connects individual components in a custom water cooling loop with precisely machined brass construction and EPDM sealing rings.

Thermal Grizzly DeltaMate is designed for secure tube installation, using a single tapered barb and a knurled compression ring to grip flexible tubing with high retention force.

• Brass construction for durable water cooling connections
• EPDM O-rings resistant to ozone and UV radiation
• Single tapered barb for straightforward tube installation
• Knurled compression ring for secure tubing retention
• Robust design supports installation with a hex key

A practical fitting for building reliable custom liquid cooling loops with clean component integration.

Enhed til måling og overvågning af grafikkortets strømforbrug via 12VHPWR-stikket med OLED-visning, stikregistrering, temperatursensorer og en hørbar alarm.

WireView Pro GPU forbindes mellem grafikkortet og strømforsyningen for at vise og optage volt, ampere og watt på en OLED-skærm samtidig med at den registrerer kablespecifikationer og advarer ved forkerte tilslutninger, overstrøm eller overophedning.

• Viser aktuel effekt (W), spænding (V), strøm (A), min/max, 60-sekunders gennemsnit (RAVG) og samlet energi (Wh)
• Måler og registrerer kun effekt gennem 12VHPWR-strømstikket (måler ikke via bundkortets PCIe-slot)
• Stikregistrering for kablespecifikationer 150W / 300W / 450W / 600W; fås i Normal og Reverse pin-orienteringer
• Interne temperatursensorer ved strømkonnektorerne samt to eksterne 10K NTC-sensorer med 5 cm og 20 cm kabler
• Hørbare summeradvarsler ved forkerte kabler/tilslutninger, overskredne temperaturgrænser eller justerbare strømgrænser
• Aluminiumshus med optimeret kabelstyring og en OLED til hurtige, overskuelige målinger

Velegnet til vurdering af GPU-strømforbrug og til at opdage strømtoppe på højtydende kort; enheden kan blive meget varm under drift, så undgå at røre kassen og lad den køle af efter nedlukning.

Termisk paste, grå, 10ml / 26g

Quick disconnect fitting for custom water cooling loops combines a female QDC connector with a male thread, drip-free coupling, integrated shutoff and a vacuum-assisted anti-leak design.

Thermal Grizzly DeltaMate Quick Disconnect is precision-machined from brass and uses EPDM sealing rings for reliable sealing in demanding water-cooling setups.

• Push-to-connect and slide-to-release locking mechanism
• Internal geometry optimized for high flow
• Designed to minimize flow resistance
• Helps replace loop components without draining the entire loop

A practical fitting for cleaner maintenance, faster component swaps and flexible custom loop configurations.